Bespoke Powder Coated Planters

Bespoke powder coated planters defining a decked seating area within this simple residential scheme.  Each planter joined to the next below the planting surface ensures the lip detail remains continuous around the perimeter of the planters.   

Back to Our Work >

About the project

A simple scheme featuring bespoke powder coated planters dividing a decked seating area from the rest of the garden.

A basic “L” shape with interconnecting sections is complimented by a straight run of planters all with sloped bases to suit the gradient of the site.

For runs of planters with lengths exceeding manufacturing limitations, typically 3.0m, we have developed a method of manufacture for bolting together below the planting surface.  The lip detail is removed at the joints therefore only evident around the perimeter giving the impression of a continuous planter.  Only a very subtle vertical seam in the planter face indicates it is made up of multiple units.

Each planter featured drainage holes in the base, integral channel feet, holes for irrigation pipework and a 30mm x 15mm lip detail.  All planters were manufactured from 1.5mm galvanised steel.  The chosen colour was RAL 9005 Jet Black in a Satin finish.

All corners of the planters were fully welded, ground then polished to offer a beautiful seamless construction.

About the project

A simple scheme featuring bespoke powder coated planters dividing a decked seating area from the rest of the garden.

A basic “L” shape with interconnecting sections is complimented by a straight run of planters all with sloped bases to suit the gradient of the site.

For runs of planters with lengths exceeding manufacturing limitations, typically 3.0m, we have developed a method of manufacture for bolting together below the planting surface.  The lip detail is removed at the joints therefore only evident around the perimeter giving the impression of a continuous planter.  Only a very subtle vertical seam in the planter face indicates it is made up of multiple units.

Each planter featured drainage holes in the base, integral channel feet, holes for irrigation pipework and a 30mm x 15mm lip detail.  All planters were manufactured from 1.5mm galvanised steel.  The chosen colour was RAL 9005 Jet Black in a Satin finish.

All corners of the planters were fully welded, ground then polished to offer a beautiful seamless construction.

Project

Bespoke Powder Coated Planters

Client

Domestic

Call us on 01903 716960 for a quote on a similar project you may have